What is the difference between square feet and square yards?

1 square yard equals 9 square feet, because 1 yard is 3 feet and area scales with the square of length. Carpet and flooring are often sold by the square yard, making the conversion useful for material purchasing. Dividing sq ft by 9 gives sq yd; multiplying sq yd by 9 gives sq ft.

Why is Marla useful in Pakistan?

Marla is the traditional Pakistani area unit for real-estate transactions, especially in Punjab and KPK. 1 Marla = 272 sq ft ≈ 25.27 m². Property listings, loan approvals, and plot auctions usually quote size in Marla or Kanal, so converting from sq ft to Marla is essential when comparing listings or valuing land.

What is the difference between built-up area and covered area?

Covered area is the actual usable floor space inside the walls of a building — what you can walk on. Built-up area adds the thickness of the exterior walls, typically 10–12% more than covered area. Super built-up area goes further by adding a share of common spaces like staircases and corridors in apartment buildings. Always clarify which measure a listing uses.

What is the difference between plot area and house area?

Plot area is the total land size, measured within the boundary walls. House area (constructed area) is the footprint of the actual building on that plot. A 10 Marla plot (2,720 sq ft) might have a 1,800 sq ft constructed area (single story) plus yard space, or a double-story design might total 3,000+ sq ft of house area on the same plot.

Can I use this calculator with metric inputs?

The calculator expects input in feet. To use meters, multiply your meter value by 3.2808 to convert to feet first. Alternatively, enter the area directly in sq m and multiply by 10.7639 to get sq ft. For Marla input, multiply by 272 to get sq ft. The tool then shows all conversions at once.

How is square footage used in real-estate pricing?

Property prices are almost always quoted per square foot or per Marla in Pakistan, per square meter in most of the world, and per square foot in the United States. Calculating total price means multiplying area by per-unit price. When comparing two listings, always normalize to the same unit — a listing quoting 'PKR 5 crore for 1 Kanal' is PKR 9,259 per sq ft.

How accurate are property listings' stated square footage?

Variably. Legal documents (mutation, registry) are authoritative. Listings by agents may round up or include ambiguous measures (super built-up vs carpet area). For high-value transactions, hire an independent surveyor to verify actual dimensions. A 5% discrepancy on a 10 Marla plot can represent tens of thousands of dollars in real purchasing-power terms.

Square Footage Calculator

Construction

Calculate area in square feet and convert to other area units.

Construction

Square Footage Calculator

Generated on April 24, 2026

Length (ft)

Width (ft)

Marla size (for local conversion)

Area

NaN sq ft

sq yards

NaN

sq meters

NaN

Acres

NaN

Marla

NaN

Step-by-step calculation

Formula

Area = Length × Width

1Area = ft × ft = NaN sq ft
2sq yards = NaN ÷ 9 = NaN
3sq meters = NaN × 0.092903 = NaN
4Acres = NaN ÷ 43,560 = NaN
5Marla (PK) = NaN ÷ 272 = NaN

?What is the Square Footage Calculator?

A square-footage calculator computes the area of a rectangular space from length and width in feet and instantly converts the result to other common area units: square yards, square meters, acres, and Marla. This is essential for real-estate agents preparing listings, homeowners comparing plot sizes, contractors estimating materials, and buyers evaluating property listings that quote area in unfamiliar units. Converting between imperial and Pakistani units is especially useful in a market where the same plot may be described in square feet, Marla, and square meters in different listings.

The Formula

Area (sq ft) = Length × Width. 1 sq yard = 9 sq ft. 1 Marla = 272 sq ft. 1 Acre = 43,560 sq ft.

For any rectangular space, area equals length multiplied by width, both in the same unit. Square yards relate to square feet by a factor of 9 because 1 yard equals 3 feet and 3² = 9. One Marla — the traditional Pakistani area unit — is 272 square feet in current common usage. One acre equals 43,560 square feet, or exactly 4,840 square yards, and in Pakistani terms, one acre is roughly 8 Kanal or 160 Marla.

Practical Examples

A 20 × 30 ft room equals 600 sq ft, approximately 55.74 m² or 2.21 Marla — useful for estimating flooring and paint quantities.

A 1 Kanal plot (60 × 90 ft) equals 5,400 sq ft, approximately 0.124 acres — the standard upper-middle-class plot size in Pakistan.

A 10 Marla house is typically built on 2,720 sq ft of land (10 × 272) — a common residential size.

One full acre equals 43,560 sq ft, or exactly 8 Kanal, or 160 Marla — the standard agricultural unit in most of Pakistan.

A 5 Marla plot is 1,360 sq ft — the minimum standard plot size in many Pakistani housing societies.

A 2 Kanal luxury plot equals 10,880 sq ft, or about 1,011 m², or 0.25 acre — roughly a quarter-acre by American standards.

Frequently Asked Questions

Divide the space into non-overlapping rectangles, measure each rectangle's length and width, calculate each rectangle's area separately, and sum them for the total. For curved sections, approximate with the closest rectangle or consult a surveyor. For multi-room totals across a whole home, the Room Area Calculator in this same category is purpose-built.

Tile Calculator

Calculate the number of tiles needed for any floor or wall, plus waste.

Paint Calculator

Calculate liters of paint needed for walls, accounting for doors and windows.

Concrete Calculator

Calculate cement, sand, and aggregate quantities for your concrete mix.

Square Footage Calculator

Square Footage Calculator

Step-by-step calculation

?What is the Square Footage Calculator?

The Formula

Practical Examples

Frequently Asked Questions

How do I measure the area of an irregular or L-shaped room?

What is the difference between square feet and square yards?

Why is Marla useful in Pakistan?

What is the difference between built-up area and covered area?

What is the difference between plot area and house area?

Can I use this calculator with metric inputs?

How is square footage used in real-estate pricing?

How accurate are property listings' stated square footage?

Explore More Tools