What is the difference between covered area and plot area?

Covered area (what this calculator sums) is the enclosed floor area inside the walls of a building. Plot area is the outer boundary of the land parcel. A 1 Kanal plot (5,440 sq ft) might have a 2,500 sq ft single-story home on it, with the rest being yard, driveway, and garden. Both numbers are meaningful but answer different questions.

How do I handle L-shaped rooms or irregular spaces?

Divide the room into non-overlapping rectangles, enter each as a separate 'room' in the calculator, and the tool will automatically sum them. For example, an L-shape can be split into two rectangles — enter each and label them as 'living area part 1' and 'living area part 2' (or similar). Precision declines with highly irregular shapes.

Does this calculator save my entries?

No. Everything resets when you refresh the page or navigate away. All data stays in your browser session for privacy — nothing is stored on any server. If you need to save your calculation, take a screenshot or write down the results before leaving the page.

Why does the result show area in Marla?

Because Pakistani real estate and construction routinely use Marla as the primary area unit, especially in Punjab and KPK. Showing Marla alongside sq ft and m² lets you quickly relate the area to property listings and construction quotes that use the traditional unit. A 10 Marla house is 2,720 sq ft.

How is this different from the Square Footage Calculator?

The Square Footage Calculator handles a single rectangle at a time and is ideal for individual rooms, plots, or simple spaces. The Room Area Calculator is designed for whole-home totals — enter multiple rooms one after another and see a running sum. Choose based on whether you're measuring one space or aggregating several.

Should I include exterior walls in my measurements?

Depends on what you need. For flooring, paint, or furniture planning, measure interior dimensions only (between the inside faces of walls). For architectural drawings or real-estate 'built-up area' calculations, include the exterior walls (measure outside-face to outside-face). Interior measurements usually run 10–12% smaller than built-up area.

How do I convert my total to Marla for a real-estate comparison?

The calculator shows Marla automatically alongside sq ft. If you want to do the math manually: divide total sq ft by 272 to get Marla. For example, a 2,500 sq ft house equals 2,500 ÷ 272 ≈ 9.19 Marla. Round to the nearest half Marla for typical listing comparisons.

Room Area Calculator

Construction

Calculate total area across multiple rooms and spaces.

Construction

Room Area Calculator

Generated on April 24, 2026

0.0 ft²

Marla size (for local conversion)

Total Area

0 sq ft

0.00 m² · 0.00 Marla

?What is the Room Area Calculator?

A room area calculator sums the area of multiple rooms in a house or building to give you a total floor area in square feet, with conversions to square meters and Marla. Enter each room's length and width — bedrooms, living rooms, kitchen, bathrooms, corridors — and the tool maintains a running total. This is invaluable for estimating materials (flooring, paint, wallpaper), comparing homes, calculating per-square-foot renovation costs, sizing heating and cooling requirements, and verifying a property listing's claimed area against actual measurements.

The Formula

Total Area = Σ (Length × Width) for each room. Conversions: ÷ 10.764 for m², ÷ 272 for Marla.

Each rectangular room's area is length times width. Summing the areas of all rooms gives the total floor area — which is what you typically need for whole-home material estimates, cleaning quotes, HVAC sizing, and real-estate valuation. The calculator handles any number of rooms and is particularly useful when different rooms have different shapes and you want a single total without manual addition.

Practical Examples

A typical home: Bedroom (12 × 14) + Living (15 × 18) + Kitchen (10 × 12) + Bath (8 × 6) totals 546 sq ft — enough to plan materials for a full cleanup.

Useful when planning a whole-home flooring or repainting project — the total dictates how many boxes or liters to buy.

Real-estate listings often quote total covered area; this tool lets you independently verify by room.

When dividing a renovation cost by area, using the accurate total gives a fair per-square-foot price for comparison.

Splitting construction costs across multiple buyers (joint ownership) often requires verifying each family's share of total area — use room-by-room entries.

HVAC system sizing typically needs 20–30 BTU/hr per square foot for cooling, so a 1,500 sq ft home needs roughly 30,000–45,000 BTU/hr of cooling capacity.

Frequently Asked Questions

Include every space you want to count in the total. For accurate materials estimation (flooring, paint, cooling), include all floor areas you intend to cover or treat. For real-estate-style 'carpet area' or 'covered area' measurements, typically include everything within the walls; exclude unfinished basements, open balconies, and garages unless they are part of the living space.

Tile Calculator

Calculate the number of tiles needed for any floor or wall, plus waste.

Paint Calculator

Calculate liters of paint needed for walls, accounting for doors and windows.

Concrete Calculator

Calculate cement, sand, and aggregate quantities for your concrete mix.

Room Area Calculator

Room Area Calculator

?What is the Room Area Calculator?

The Formula

Practical Examples

Frequently Asked Questions

Should I include hallways, closets, and stairs?

What is the difference between covered area and plot area?

How do I handle L-shaped rooms or irregular spaces?

Does this calculator save my entries?

Why does the result show area in Marla?

How is this different from the Square Footage Calculator?

Should I include exterior walls in my measurements?

How do I convert my total to Marla for a real-estate comparison?

Explore More Tools